MG-Rover.org Forums banner
Cancel
Create thread New Garage Forums

What retro-fits or modifications have you done to your ZT/75

  • Total voters
    93

What retro-fits and modifications have you done to your ZT/75 ?

Jump to Latest
22K views 45 replies 25 participants last post by  NickTL  
J
#1 · (Edited)
Whilst browsing this forum over the years I've been a member the technical advice asked for tends to fall into two categories "...........is broken, not working how do I fix it" and "I want to retro-fit, install, or fit.........what do I need and how do I do it"

I'm interested in learning what you've fitted to your car personally as we do seem to have quite a lot of members that like modifying their cars.

Feel free to post a list of what you've done it'll make an interesting read.

To start the ball rolling this is what I've done to date, rather small fry in comparison to others.

Armrest cubby box accessory socket
Rechargeable torch
Boot mounted warning triangle
Symphony headunit and CD changer
Hardwired handsfree kit - with stereo mute lead for Nokia 9500
Passenger side cupholder replaced with oem phone mount
Custom TT730 mount hardwired from socket in fusebox void
TT traffic module mounted behind dash
2 x Glassmount antennas - for the handsfree and TT traffic module
Driver side cupholder
Upgraded IPK to message centre using "diesel" IPK
Trafficmaster ECU
Fitted boot mounted accessory socket - still requires wiring to 12v power.

Also converted a facelift white illuminated IPK to orange illumination and earlier type dials - this hasn't been fitted but has been sold to a member.

Things that I was going to do but never got round to them.

Auto dipping mirror
Parking sensors

Lets hear from you, it's a multiple choice poll - select from the first three - and then for those that have select the areas of modifications done.

Regards
 
S
#2 ·
2004 53 plate Conn SE owned for 2 1/2 years

I've retrofitted facelift bumpers ,Xenon's and now the Premium grill.
Added torpedo badges and door handle cups.
Fitted Fuel Burning Heater.
EGR Bypass and Synergy 2.
Been through 16" Star spoke, 17" Serpents and now 17" Meteors.
Rertofitted facelift chrome boot trim
Internally I've done.
Walnut steering wheel, handbrake and gear knob.
Retrofitted real walnut dash.
Retrofitted bullet mirrors.
Retrofitted Symphony with SLE replaced with full OEM Sat Nav.
Upgraded Sat Nav head unit with BMW widescreen.
Upgrade Sat Nav unit to BMW Mk4 DVD.
Upgraded Radio module with BMW BM24.
Removed CD changer and added Intravee/KCA420 and Ipod integration.
Upgrade front door tweeters to Harmon Kardon.
Installed TrafficMaster.

For the future remote control auxillary Heater.

I love doing bits and pieces.

Stubs
 
J
#10 ·
stubie said:
2004 53 plate Conn SE owned for 2 1/2 years

I've retrofitted facelift bumpers ,Xenon's and now the Premium grill.
Added torpedo badges and door handle cups.
Fitted Fuel Burning Heater.
EGR Bypass and Synergy 2.
Been through 16" Star spoke, 17" Serpents and now 17" Meteors.
Rertofitted facelift chrome boot trim
Internally I've done.
Walnut steering wheel, handbrake and gear knob.
Retrofitted real walnut dash.
Retrofitted bullet mirrors.
Retrofitted Symphony with SLE replaced with full OEM Sat Nav.
Upgraded Sat Nav head unit with BMW widescreen.
Upgrade Sat Nav unit to BMW Mk4 DVD.
Upgraded Radio module with BMW BM24.
Removed CD changer and added Intravee/KCA420 and Ipod integration.
Upgrade front door tweeters to Harmon Kardon.
Installed TrafficMaster.

For the future remote control auxillary Heater.

I love doing bits and pieces.

Stubs
Click to expand...
Now that's what I mean - make's my mod's fade into
insignificance, how do you find the time and more importantly the parts I've been looking for a walnut steering wheel for ages etc.

ceedy said:
53 plate ZT CDTI 135 Auto .. 3 years ownership

Home made EGR Bypass
Synergy 2 & Pierburg MAF
Air intake Mods.
Cruise Control
Trafficmaster
New IPK with Message Centre
Remote Lazy lock/venting/ Boot POP
Remote FBH ( in process)
Reversing Sensors .Not OEM
BMW dimming Mirror
Double Din fitted and removed
New DoubleDIN type in Planning
Kenwood MP3/CD/USB player
Still with 6 CD changer
2 Rear Head rests with DVD/USB/SD card/Games Players/IR Headphones/Joypads
Rear Power sockets and USB socket in Ashtray
235 tyres with rim protectors.


C.
Click to expand...
Again jealous!

Musketeer said:
53 Plate 75 CDT Club SE - 18 months of ownership.

1, Wind deflectors
2, Message Centre IPK
3, Synergy 2 with Pierburg maf
4, Intake mod
5, Reverse Parking sensors (not OEM)
6, Traffic Master
8, Boot mounted Lip Spoiler
9, Towbar with removable hitch
10, Auto dimming Rear View Mirror
11, New Sterio/DVD player with USB, SD card and IPhone reading ability
12, Parrot Bluetooth Handsfree Kit.
13, Peugeot pump mod.

Things I would like to fit when money is available.

1, Full Leather Interior
2, Cruise control
3, Upgrade the dash and steering wheel to real wood.
Click to expand...
Not bad Musky you've done really well!

alexward said:
My mods:

1) Stainless steel cat back exhaust system from Powerflow
2) Green Cotton aftermarket panel filter
3) Upgraded Kenwood head unit with direct Ipod control
4) Kenwood active sub woofer
5) Blue backlit climate control panel
6) LeMans green brake calipers to match body colour
7) Oil catch tank

Mods to be done:

1) EBC brake setup all round
2) Possible upgraded enclosed induction system
3) Green steering wheel
4) Sat nav system
5) Black oak dash
6) Superchips remap
7) Wheels refurbed in shadow chrome
Click to expand...
Alex you seem to be in the middle of your mods - hope you get the rest done - nice colour your ZT.

IanMac said:
Start point was a 2002 75CDT Conn SE with FF sunroof

It was not missing that much but I have since retrofitted:
Door torpedo badges.
Door handle chrome cups.
Rover Ron Synergy.
17" Serpents.
Heated windscreen washers.
Mudflaps.
Rover75 halfmoon numberplate.

Internally:
Walnut steering wheel, handbrake and walnut/leather gear knob.
Driver side cupholder
Driver side grab handle
TrafficMaster.
Armrest cubby box rechargeable torch
Boot mounted warning triangle
Boot Luggage Nets

I want to keep mine in as original conditon as possible so have pretty much run out of rover modifications that I can make now which is a bit of a shame because I was enjoying it.
Click to expand...
Sorry you've run out of things to do - good job though.

eddybrown said:
My list isn't as big as everyone elses but one day :) Most of my mods have been 2nd hand or cheap eBay jobbies. Anyway...

Started out as a 75 CDT Club:

18" Hairpins
Synergy 2
Air Intake mod
Remapped (now back to standard)
Sony Single DIN mp3 headunit
Reversing sensors
Peugoet intank pump
New Leather Steering Wheel

Future Mods:
EGR Bypass
Stainless exhaust with decat
Proper Remap
Bluetooth TMC
Cruise Control
Heated Leather Seats
Click to expand...
Don't knock what you've done eddy, sounds good to me

Kris214 said:
04 plate facelift ZT+ CDTi 135 nearly 9 months ownership.

Stuff the car came with:

Cruise control
Message display centre with trafficmaster
Headlight washer jets
Auto wipers
Auto dimming rear view mirror
8 Airbags
Xenon headlights
Apex alloys

Mods done:

Synergy 2
Pierburgh Maf
K&N air filter
Reconditioned the alloys

To do.

EGR bypass valve - bought but not yet fitted (not brave enough)
Air intake mod - maybe today although I've been saying that for a while)
Viton O rings
Exhaust with decat
Manual rear blind - bought but not fitted but would love an electric one

OR

Swap the whole lot for a v8 ZT or I would seriously consider a ZS 180 in Biomorphic which there just so happens to be in the for sale section.
Click to expand...
Kris you've only had the car 9 months and if I remember correctly you've had some problems with it, so not bad so far.

We do seem to be having more views than posts in the poll - come on join in tell us what you've done or not as the case may be.

Regards
 
J
#24 ·
Kris, sorry hadn't fogotten you - just couldn't find a recent post I'd made on the subject of fitting the accessory socket. Just found it this morning, have a look at this thread should help you as I've posted some picture's.

As regards fitting a boot accessory socket should be straight forward - just find somewhere to fit it, connect to an earthing point in the boot area and run a positive 12 volt feed from the front - fusebox or battery, fused of cause and if you want it ignition controlled via a relay. Fitted mine and earthed it but never got round to connecting a positive feed - been a bit busy the last couple of months.

Hope it helps.

Regards
 
C
#4 ·
53 plate ZT CDTI 135 Auto .. 3 years ownership

Home made EGR Bypass
Synergy 2 & Pierburg MAF
Air intake Mods.
Cruise Control
Trafficmaster
New IPK with Message Centre
Remote Lazy lock/venting/ Boot POP
Remote FBH ( in process)
Reversing Sensors .Not OEM
BMW dimming Mirror
Double Din fitted and removed
New DoubleDIN type in Planning
Kenwood MP3/CD/USB player
Still with 6 CD changer
2 Rear Head rests with DVD/USB/SD card/Games Players/IR Headphones/Joypads
Rear Power sockets and USB socket in Ashtray
235 tyres with rim protectors.


C.
 
M
#5 · (Edited)
53 Plate 75 CDT Club SE - 18 months of ownership.

1, Wind deflectors
2, Message Centre IPK
3, Synergy 2 with Pierburg maf
4, Intake mod
5, Reverse Parking sensors (not OEM)
6, Traffic Master
8, Boot mounted Lip Spoiler
9, Towbar with removable hitch
10, Auto dimming Rear View Mirror
11, New Sterio/DVD player with USB, SD card and IPhone reading ability
12, Parrot Bluetooth Handsfree Kit.
13, Peugeot pump mod.

Things I would like to fit when money is available.

1, Full Leather Interior
2, Cruise control
3, Upgrade the dash and steering wheel to real wood.
 
A
#6 ·
My mods:

1) Stainless steel cat back exhaust system from Powerflow
2) Green Cotton aftermarket panel filter
3) Upgraded Kenwood head unit with direct Ipod control
4) Kenwood active sub woofer
5) Blue backlit climate control panel
6) LeMans green brake calipers to match body colour
7) Oil catch tank

Mods to be done:

1) EBC brake setup all round
2) Possible upgraded enclosed induction system
3) Green steering wheel
4) Sat nav system
5) Black oak dash
6) Superchips remap
7) Wheels refurbed in shadow chrome
 
I
#7 ·
Start point was a 2002 75CDT Conn SE with FF sunroof

It was not missing that much but I have since retrofitted:
Door torpedo badges.
Door handle chrome cups.
Rover Ron Synergy.
17" Serpents.
Heated windscreen washers.
Mudflaps.
Rover75 halfmoon numberplate.

Internally:
Walnut steering wheel, handbrake and walnut/leather gear knob.
Driver side cupholder
Driver side grab handle
TrafficMaster.
Armrest cubby box rechargeable torch
Boot mounted warning triangle
Boot Luggage Nets

I want to keep mine in as original conditon as possible so have pretty much run out of rover modifications that I can make now which is a bit of a shame because I was enjoying it.
 
E
#8 ·
My list isn't as big as everyone elses but one day :) Most of my mods have been 2nd hand or cheap eBay jobbies. Anyway...

Started out as a 75 CDT Club:

18" Hairpins
Synergy 2
Air Intake mod
Remapped (now back to standard)
Sony Single DIN mp3 headunit
Reversing sensors
Peugoet intank pump
New Leather Steering Wheel

Future Mods:
EGR Bypass
Stainless exhaust with decat
Proper Remap
Bluetooth TMC
Cruise Control
Heated Leather Seats
 
W
#37 ·
eddybrown said:
My list isn't as big as everyone elses but one day :) Most of my mods have been 2nd hand or cheap eBay jobbies. Anyway...

Started out as a 75 CDT Club:

18" Hairpins
Synergy 2
Air Intake mod
Remapped (now back to standard)
Sony Single DIN mp3 headunit
Reversing sensors
Peugoet intank pump
New Leather Steering Wheel

Future Mods:
EGR Bypass
Stainless exhaust with decat
Proper Remap
Bluetooth TMC
Cruise Control
Heated Leather Seats
Click to expand...
Eddy, 'remapped (now back to standard)' Was that deliberate or planned?
 
K
#9 ·
04 plate facelift ZT+ CDTi 135 nearly 9 months ownership.

Stuff the car came with:

Cruise control
Message display centre with trafficmaster
Headlight washer jets
Auto wipers
Auto dimming rear view mirror
8 Airbags
Xenon headlights
Apex alloys

Mods done:

Synergy 2
Pierburgh Maf
K&N air filter
Reconditioned the alloys

To do.

EGR bypass valve - bought but not yet fitted (not brave enough)
Air intake mod - maybe today although I've been saying that for a while)
Viton O rings
Exhaust with decat
Manual rear blind - bought but not fitted but would love an electric one

OR

Swap the whole lot for a v8 ZT or I would seriously consider a ZS 180 in Biomorphic which there just so happens to be in the for sale section.
 
M
#11 ·
mods done so far:
scott & haywood stainless exhaust system
k&n flat panel air filter
modified vis motors
alpine v12 amp
pioneer bandpass subwoofer
harmon kardon speakers(components)
bluetooth/sd card/cd/usb headunit
limo tint windows
led "dayrun" lights(with strobe function!!!)
mg laser etched sill trims
hard wired snooper system
blue led interior lighting(front footwells,rear footwells & boot area)
 
J
#18 ·
Some of that sounds a bit different from the norm, bishi

keith8000_0 said:
i have fitted. 190 cams. 190 ecu,induction kit, full stainless exhaust and decat, reverse park sensors. electric rear blind, auto dim rear view mirror, cruise control, message center,vis motor position indicator circuit,pioneer ice with amps and sub.
Click to expand...
You've been a lot more busy than me Keith

ZTTJim said:
Blimey by the looks of it i need to get busy. Anyway this is what i've done so far.

K&N panel filter
OEM rubber boot mat (very rare ;)! )
Sony head unit with direct ipod connection

To come...

New inlet manifold that doesn't rattle like a spanner in plastic box!
Wheel refurb or a set of Apex's (anyone got a set?)
Stainless exhaust (back box)
Uprate the front discs to EBC jobbies and pads
Paint calipers red
Fit crome door finishers that I've had for ages!
Crome wing mirror covers
Change temp colour of Xenon's
And now the biggy, full leather re-trim in maroon/burgundy! TBH I'm still undicided on this because 1. The Wife thinks it's a waste of money and because I've just bought a Jag S-Type for which she hit the roof! :) and 2. I'm a bit scared to in case I choose the wong colour! :nelson:


Jim
Click to expand...
You'll have to get on with that Jim, you've got some work to do and tell 'er indoors that it's not a waste of money if it's for an MGR!

coalburnflyer said:
air intake mod ..... Yes i know !!!!, i find cars a pain in rectus ( flyer walks off ashamedly... Flyer.
Click to expand...
enough said :tapfoot:

robdrinkwater said:
OK, let's start at the engine and work back:

MG ZTT CDTi 135+

Full custom remap and dynoed at 185-190 Ps (dependent on atmospheric pressure).
EGR Bypass & EGR coded out of ECU map.
Shortened air intake modification.
Turbo wastegate spring assister.
Full stainless big bore exhaust system, custom built by Collison Motoring Services in Waterlooville, featuring a Vortex swirl pipe system.
Decatted.

Retrofit Xenon headlamps.
Xenon main beam conversions.
Pure white foglight bulbs.

Heated washer jets.
BMW Widescreen bordmonitor.
BMW BM24 radio unit.
BMW Mk4 DVD sat nav computer.
BMW Hybrid digital TV tuner.
DVD player in boot, remote eye in ceiling & remote in front.
Dice unit connected to Ipod Classic 120Gb (replacement for CD changer.)
Pure digital radio.
Nokia Bluetooth handfree kit.
OE Traffic master system.
Centre armrest accessory socket.
Power supply for mobile phone charger in armrest.
Kenwood underseat subwoofer, with remote control in centre console.
All LED interior lighting.
OE cruise control.

Uprated ZT 190 brakes up front.

OE space saver spare wheel & tool kit (replaces the OE can of goo!)


Think that's about it, I'll add things as I remember them.

Regards, Rob.
Click to expand...
Nice one Rob, wondered when you let us have your list - you've probably fogotten more that I've done lol

dadragon said:
Interior:

Removed and fitted full leather interior inc' electric heated seats
Custom built double din HU chasis
Installed new door speakers and flat panel subwoofer
Installed and ran wiring for ICE amp
Added electric rear blind
Added aux power supply in chubby box
Installed a USB port into the chubby box connected to HU
Installed ten disc CD changer into the boot using OEM Kenwood bracket
Fitted lighted sun visors to a ZT

Exterior:

Grafted R75 chrome strips and chrome bumper moulds to a ZT
Added bullet badges to a ZT
Added V6 and CDTi badges to a ZT
Meshed lower "air intake" blanking holes on ZT bumper
Changed the MG badges for new ones, bumper and boot lit

Engine bay:

Added oil catch tank (KV6)
Installed custom air feed and induction cone (KV6)
Custom stainless steel plenum drain pipe added (Dads mod!) ZT
EGR clean and disconnect (CDTi)
Air intake mod (CDTi)
Click to expand...
That all sounds great - you really have been busy - bet it all looks great.

As I said when I first started this poll I've not done much - and the above confirms it, starting to feel like flyer. Mind you mine did come with the heated leather electric seats, chrome bullet mirrors and cruise control that so many people have retrofitted.

Keep em coming.

Regards
 
Z
#13 ·
Blimey by the looks of it i need to get busy. Anyway this is what i've done so far.

K&N panel filter
OEM rubber boot mat (very rare ;)! )
Sony head unit with direct ipod connection

To come...

New inlet manifold that doesn't rattle like a spanner in plastic box!
Wheel refurb or a set of Apex's (anyone got a set?)
Stainless exhaust (back box)
Uprate the front discs to EBC jobbies and pads
Paint calipers red
Fit crome door finishers that I've had for ages!
Crome wing mirror covers
Change temp colour of Xenon's
And now the biggy, full leather re-trim in maroon/burgundy! TBH I'm still undicided on this because 1. The Wife thinks it's a waste of money and because I've just bought a Jag S-Type for which she hit the roof! :) and 2. I'm a bit scared to in case I choose the wong colour! :nelson:


Jim
 
R
#15 ·
OK, let's start at the engine and work back:

MG ZTT CDTi 135+

Full custom remap and dynoed at 185-190 Ps (dependent on atmospheric pressure).
EGR Bypass & EGR coded out of ECU map.
Shortened air intake modification.
Turbo wastegate spring assister.
Full stainless big bore exhaust system, custom built by Collison Motoring Services in Waterlooville, featuring a Vortex swirl pipe system.
Decatted.

Retrofit Xenon headlamps.
Xenon main beam conversions.
Pure white foglight bulbs.

Heated washer jets.
BMW Widescreen bordmonitor.
BMW BM24 radio unit.
BMW Mk4 DVD sat nav computer.
BMW Hybrid digital TV tuner.
DVD player in boot, remote eye in ceiling & remote in front.
Dice unit connected to Ipod Classic 120Gb (replacement for CD changer.)
Pure digital radio.
Nokia Bluetooth handfree kit.
OE Traffic master system.
Centre armrest accessory socket.
Power supply for mobile phone charger in armrest.
Kenwood underseat subwoofer, with remote control in centre console.
All LED interior lighting.
OE cruise control.

Uprated ZT 190 brakes up front.

OE space saver spare wheel & tool kit (replaces the OE can of goo!)


Think that's about it, I'll add things as I remember them.

Regards, Rob.
 
D
#16 ·
Interior:

Removed and fitted full leather interior inc' electric heated seats
Custom built double din HU chasis
Installed new door speakers and flat panel subwoofer
Installed and ran wiring for ICE amp
Added electric rear blind
Added aux power supply in chubby box
Installed a USB port into the chubby box connected to HU
Installed ten disc CD changer into the boot using OEM Kenwood bracket
Fitted lighted sun visors to a ZT

Exterior:

Grafted R75 chrome strips and chrome bumper moulds to a ZT
Added bullet badges to a ZT
Added V6 and CDTi badges to a ZT
Meshed lower "air intake" blanking holes on ZT bumper
Changed the MG badges for new ones, bumper and boot lit

Engine bay:

Added oil catch tank (KV6)
Installed custom air feed and induction cone (KV6)
Custom stainless steel plenum drain pipe added (Dads mod!) ZT
EGR clean and disconnect (CDTi)
Air intake mod (CDTi)
 
N
#17 ·
Not to many upgrades, but very pleased with how I got my ZT.

Apex alloys including spare wheel

Image


Full red leather re-trim

Image


Parking sensors

Image


Double din CD/DVD/TV/Bluetooth/Sat-Nav

Image


Plus SuperChip re-map and green airfilter (205bhp)

Plus oil catch tank

Plus window tints

I'm sure I have forgotten somthing. Car drives like a dream, and is still in mint condition. Cant think of any thing else I want to add to it, except maybe TM to my message centre.

Nick.
 
K
#19 ·
typing this via mobile so apologise for the format. Mods so far: synergy 2, pierbergh maf, egr bypass, air intake mod, k&n air filter, kenwood single din head unit with ipod control and blue tooth hands free, rear parking sensors (not oem). Mods i'd like to do: xenon lights with head lamp wash, cruise control, that new fancy dangled head unit everyone's raving about.
 
C
#20 ·
SO far Ive fitted the following ,

- EGR Bypass
- FBH ( still needs some work)
- Xenon Headlights
- Rover Ron Box
- Alcantara Interior
- Walnut Dash Trim
- Cubby box power socket
- heated Washers
- Parking Sensors
- Full Size spare wheel


Things to do , eventally

190 Brakes
Torpeado badges (depends what they would look like on a ZT - not sure )
Heated seats ( if I can get all the bits )
Cruise control
 
J
#23 ·
Carl said:
SO far Ive fitted the following ,

- EGR Bypass
- FBH ( still needs some work)
- Xenon Headlights
- Rover Ron Box
- Alcantara Interior
- Walnut Dash Trim
- Cubby box power socket
- heated Washers
- Parking Sensors
- Full Size spare wheel


Things to do , eventally

190 Brakes
Torpeado badges (depends what they would look like on a ZT - not sure )
Heated seats ( if I can get all the bits )
Cruise control
Click to expand...

Nice one Carl - good impressive list of done and to do - where do you find the time. As regards torpedo badges, take it you'll go for the 2 litre ones, I've seen them recently on a ZT - looked fine.

Cheers
 
R
#25 ·
On a 2002 Rover 75 Club SE with intelligence pack, I have done the following;

Fitted MG ZT Alcantara and leather seats
Fitted MG ZT black door cards
Fitted original leather handbrake grip
Fitted real walnut dashboard
Upgraded the Harmony unit to the Symphony unit
Fitted CD changer in the glovebox
Fitted the wood and leather gear knob
Fitted a drivers side grab handle
Fitted illuminated sun visors
Fitted Rover 'D' post badges
Fitted the contemporary 'soft touch' black rimmed steering wheel

Image

Image

Image

Image


The pictures don't show the newly installed walnut dash! But you get the idea!
 
J
#28 ·
red_rover said:
On a 2002 Rover 75 Club SE with intelligence pack, I have done the following;

Fitted MG ZT Alcantara and leather seats
Fitted MG ZT black door cards
Fitted original leather handbrake grip
Fitted real walnut dashboard
Upgraded the Harmony unit to the Symphony unit
Fitted CD changer in the glovebox
Fitted the wood and leather gear knob
Fitted a drivers side grab handle
Fitted illuminated sun visors
Fitted Rover 'D' post badges
Fitted the contemporary 'soft touch' black rimmed steering wheel

The pictures don't show the newly installed walnut dash! But you get the idea!
Click to expand...
You've been very busy and it all looks good, it's a credit to you red_rover.

Regards
 
J
#30 ·
I think this thread shows what I thought in the first place - we love our ZT/75's.

To date we've had 47 member's vote - the highest number of modifications being retrofits and engine mods.

We've also had 5 member's vote that they'd like to do something - post with what that is - it might be easier that you think with a little assistance via the forum's.

In all I'm very impressed with the time and effort that some of this forum have given to their vehicles.

Regards
 
W
#38 · (Edited)
Mods

I have a Connie SE so it had pretty much everything, TV/sat nav, electric rear blind, dipping mirror, heated seats, etc. I have enjoyed adding:
Synergy 1
Pierburgh Maf and Mafam
air intake mod
bonnet release mod
LED Dayrun front lights
17" Mercury wheels
Freeview tuner
Chrome door finishers
Walnut and chrome interior mods
Wood/leather steering wheel
walnut gearknob and handbrake
new type PCV unit.http://img205.imageshack.us/img205/4771/img1216b.jpg
 
M
#41 ·
so far i've

* fitted egr bypass
* stainless decat and flexi
* air intake mod 3 but with shorter pipe to reduce chance of sucking up water
* chrome indicator bulbs
* jules resistor mod
* tinted rear windows (b pillar back)

to do

* fit tyres pressure montioring sensors
* tuning box
* increase boost pressure to 20psi
* performance air filter
* bigger front brakes with drilled and grooved discs

and other things but cant remember LOL
 
#42 ·
So far on my ZT I have fitted/modified:
  • Synergy 2 tuning box
  • Air box mod
  • Pipercross air filter
  • LED strip lighting in the boot
  • Blaupunkt Rover CD32 head unit with aux-in connection lead
Still yet to be done:
  • Bluetooth hands-free kit
  • Stainless decat exhaust system
  • Footwell courtesy & ambient lighting
  • Accessory socket in the central armrest cubby
  • Stainless grille mesh a la the mk1
 
G
#44 ·
Just bought the car so no mods yet.

However I would like to.....

Fit Cruise control
Trip computer
Auto folding door mirrors
Heated seats
Rear cupholders
Rear centre arm rest with the cupholder and tray thing
Black door mirror covers to replace the chrome ones currently on the car
Auto wipers

And any other little bits that the car could have come with.
I would like to have the car as standard as possible but with all the toys.
 
MG-Rover.org Forums
posts
5.9M
members
140K
Since
2001
A forum community dedicated to MG & Rover owners and enthusiasts. Come join the discussion about performance, troubleshooting, upgrades, maintenance, and more!
Full Forum Listing
Explore Our Forums
MGF and MGTF MG ZR / Rover 25, 200 & Streetwise MG ZT / Rover 75 MG / Rover Related Chat - up to 2005 MG ZS (2001-2005) / Rover 45 & 400