It is really, although you will get it to sit a little neater if you countersink the holes slightly.

 

the holes on mine were already countersunk, but it didn't curve the same as the bumper, so i just drilled the holes and used the bolts to pull the bumper and heatshield together.
don't be tempted to use black bolts. they look great when they go on, but give it 2 months and they'll be rusting.
go for stainless allen bolts if you can.

 

re. countersinking - I was refering to the holes which he will need to drill in the bumper.

I've just realised Mark must be asking about fitting to a 25, in which case it won't be quite a straightforward bolt-on job unless the ZR lower lip is fitted to the bumper.

 

No, It seems it wont be, I will have to do a bit of bending and remoulding to get it to fit....will try it once the weather clears up

 

good point, yes, i countersunk mine.
:slap: not doing too good at the understanding at the moment :lol:

 

not doing too good at the understanding at the moment :lol:

It's this cold weather - makes the brain sluggish; I'm having the same trouble at times

 

I bolted mine on the other day, I used counter sink stainless bolts, yes they have a flat head but there not coming off without a fight !!!