MG-Rover.org Forums banner

1 - 4 of 4 Posts

·
Registered
Joined
·
30 Posts
Discussion Starter #1
I've seen a couple pictures of ZR's with these fitted and I'm intrigued:

On the first (here) the pipes appear to stick out the back by two or three inches. On the second (see this thread - its near the bottom), it sits neatly underneath the heat shield, not protruding at all.

Both cars in question appear to have the standard rear bumper so I'm intrigued as to why this may be.

Can anyone shed any light on this?

Cheers,

Chris
 

·
Registered
Joined
·
9,317 Posts
chris from what i can see in the first picture it's an x-power back box, but it the second picture he states that it is a twin janspeed exhaust.
 

·
Registered
Joined
·
3,510 Posts
Just found this thread.

Rogue has the X-Power backbox on his 160. The exhausts tend to expand when hot - the XPower logo is clearly visable. However when cold, they shrink back and the XPower logo isn't quite so visable.
 
1 - 4 of 4 Posts
Top