MG-Rover.org Forums banner

1 - 6 of 6 Posts

·
Registered
Joined
·
49 Posts
Discussion Starter #1
Anyone know how hard it is to convert my windows from work out windows to lazy electric windows and what I need to do it?

Please Help

TommyG2688
 

·
Registered
Joined
·
3,699 Posts
youl need the motors from both sides, the complete wiring loom if not already behind the dash, the one touch down from the drivers side door, swiches, relay, multifunction unit etc. can be more hassle than its worth to do yourself.... i do believe by romour that someone called technozen knows the ins and out of converting.
 

·
Registered
Joined
·
21,962 Posts
ricc said:
youl need the motors from both sides, the complete wiring loom if not already behind the dash, the one touch down from the drivers side door, swiches, relay, multifunction unit etc. can be more hassle than its worth to do yourself.... i do believe by romour that someone called technozen knows the ins and out of converting.
It must be easy, even TJ managed to do it :dddc:

Cheers
Skelo
 

·
Registered
Joined
·
21,962 Posts
ricc said:
TJ didnt manage to do it, technozen gave him some very very detailed instructions.....
But he did the physical fitting bit though. Instructions do help, maybe there should be a sticky in the how to section.

Cheers
Skelo
 
1 - 6 of 6 Posts
Top