MG-Rover.org Forums banner

1 - 9 of 9 Posts

·
Registered
Joined
·
134 Posts
Discussion Starter · #1 ·
Hi everyone.

I'm looking for some second hand alloys to put on my 1998 Rover 820i. I've been looking on Ebay and found quite a few but im not sure if they will fit. I very much like TSW Stealth wheels but do I need ones for Rover or is there another car make with the same fitment? That way I have a wider choice to look at. E g - Vauxhall TSW's may fit Rovers or BMW's might fit too etc.

Many Thanks in advance.

DARREN.

 
G

·
DAEWOO
Model P.C.D. Offset C/Bore
Matiz 4 x 114.3 38 �

HONDA
Model P.C.D. Offset C/Bore
Accord 92>, Prelude 92>, Legend >90, Civic V-Tec 97> 4 x 114.3 38 64.0

NISSAN
Model P.C.D. Offset C/Bore
200SX >94, Bluebird, Prairie, Primera 4 x 114.3 35...42 66.0

ROVER
Model P.C.D. Offset C/Bore
600, 800 4 x 114.3 35 64.0

VOLVO
Model P.C.D. Offset C/Bore
T4, S40, V40 4 x 114.3 35...38 67.0

and that's your lot!
 

·
Registered
Joined
·
136 Posts
You could always go for Vitesse 17s, or 620ti 16s. The latter tend to be easier found and cheaper.

My car has ti 16s fitted:

 

·
Registered
Joined
·
3,208 Posts
And I've got those very 16's available

Note : Advertised in the ForSale section, please dont delete my post lol
 

·
Registered
Joined
·
1,201 Posts
DAEWOO
Model P.C.D. Offset C/Bore
Matiz 4 x 114.3 38 �

HONDA
Model P.C.D. Offset C/Bore
Accord 92>, Prelude 92>, Legend >90, Civic V-Tec 97> 4 x 114.3 38 64.0

NISSAN
Model P.C.D. Offset C/Bore
200SX >94, Bluebird, Prairie, Primera 4 x 114.3 35...42 66.0

ROVER
Model P.C.D. Offset C/Bore
600, 800 4 x 114.3 35 64.0

VOLVO
Model P.C.D. Offset C/Bore
T4, S40, V40 4 x 114.3 35...38 67.0

and that's your lot!
actually thats not........

honda prelude ( 4 stud )
mitsubishi galant ( 97 on )
honda accord ( 4 stud )
mitsubishi spacewagon
nissan skyline ( 4 stud usually non-turbo )
mitsubishi lancer EVO I II III

these may have different bore sizes but spiggots are attainable
 
1 - 9 of 9 Posts
Top