MG-Rover.org Forums banner

1 - 7 of 7 Posts

·
Registered
Joined
·
56 Posts
no. but it is the same profile as the 135 engine.

plus the VVC exhaust cam has a fitting for a pulley on both ends, non vvc cams don't.
 

·
Registered
Joined
·
90 Posts
apparantly a good mod is the piper exhaust cam for the vvc. thinking of doing it myself but not sure what the gains are.
 

·
Registered
Joined
·
757 Posts
Discussion Starter · #5 ·
apparantly a good mod is the piper exhaust cam for the vvc. thinking of doing it myself but not sure what the gains are.
same here. but they need your cam shaft for a week, as its a re grind. hence was looking for something else to send them. cant have my car off the road for a week.

their website rekons around 8bhp increase, which is a lot for 150 notes!

Andy
 

·
Registered
Joined
·
13,616 Posts
same here. but they need your cam shaft for a week, as its a re grind. hence was looking for something else to send them. cant have my car off the road for a week.

their website rekons around 8bhp increase, which is a lot for 150 notes!

Andy
Sounds rather tempting :idea: Worthwile on a 216?
 
1 - 7 of 7 Posts
Top