MG-Rover.org Forums banner
1 - 3 of 5 Posts

· Registered
Joined
·
6,848 Posts
Discussion Starter · #1 ·
Hi All,

So I've got round to wiring in a Dual USB Socket in my ZR.
I've taken the feed from the existing 12v Aux. Socket.

It all works swimmingly, but the USB socket illuminates and it is permanently illuminated, so it seems the aux. feed is permanently live.
I'm now worried about it draining the battery. Can anyone suggest an easy to reach ignition switched live near the bottom of the dash. I'm loathed to cut into the CD Player wiring harness. :/

@Roverlike , you're the resident electronics guru, any thoughts? (Would the USB socket be ok staying on the permanent feed?)
 

· Registered
Joined
·
6,848 Posts
Discussion Starter · #4 ·
Thanks for the reply!

Well, it doesn't get warm, but there is a light. That is permanently illuminated.
I've unplugged it for now, but has been in situ over 11hrs and no problems.

I have considered running a new fuse, but how would I "create" the slot for it, I have several empty but there is "nothing there" behind it?
 
1 - 3 of 5 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top