MG-Rover.org Forums banner

1 - 2 of 2 Posts

·
Registered
Joined
·
1 Posts
Discussion Starter · #1 ·
Hi all i'm new here and need a wee bit of help
rover 100 knightsbridge flat battery for 2 weeks, the alarm sound when new car batt was replaced, no change.
auto spark came out peed about 2 hours replaced key fob with out code no change.said it was a faulty alarm unit and left!!!!
5as fitted led is constant but has a small pulse going through it.
i have bypassed the starter as on this forum i.e. white /red + brown/red to start on ign switch tested alot of wires found that on crank the stepper is not getting a pulse from ECU is there somthing i have missed ???
I HAVE CHECK OUT ALOT OF FORUMS AND THIS IS THE BEST FOR INFO.GREAT!!!
p.s i am a sparky/tech in a garage and this is the boss's car i have bneeen on it for 3 hours so far and he is starting to dout me !!!
 

·
Registered
Joined
·
7,067 Posts
your best bet would be to get a working, ECU, alarm box and fob from a scrap r100 with the same engine.

Does the red led flash all the time?
 
1 - 2 of 2 Posts
Top