MG-Rover.org Forums banner
1 - 2 of 2 Posts

·
Registered
Joined
·
458 Posts
Is it a brand new rad or a second hand one? If its new then you wont need to flush it but if its a second hand one i would flush it and then check for any leaks.Just use a hose to get all the excess coolent from you system.Remember to bleed the system when your finsihed so there are no air locks.
 
1 - 2 of 2 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top