MG-Rover.org Forums banner

split leather seat

2K views 6 replies 5 participants last post by  Dorchester 
#1 ·
not sure if this is the right area for this thread but...

car is about seven years old and the leather is all in good condition except it has spilt around one of the holes in the top where the head rest comes out
i hope this pic explains it better than i did.



the plastic thingy would hide the rip if i was able to fix it.
Any surgestions?
 
See less See more
1
#2 ·
I have now fixed it i put a triangle of felt behind the split then glued the whole lot up with evostick

it is not perfect but is a huge improvement you can only see it when looking backwards from the drivers seat now :bgrin2:

i shall put a photo of it up before the end of the week
 
#7 ·
After 11 years I hope for the guy the solution was at last found out... ;)
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top