MG-Rover.org Forums banner
1 - 3 of 70 Posts

· Registered
mg_zt
Joined
·
43 Posts
Reversing Light Switch

No you will need to remove the Left hand front wheel, the switch is located on the back of the gearbox, you will need a 19mm combination spanner, I think. it's easy enough if your a competent home mechanic, I found the hardest part was removing the connector.
 
1 - 3 of 70 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top