MG-Rover.org Forums banner
1 - 2 of 2 Posts

·
Registered
Joined
·
22 Posts
Discussion Starter · #1 ·
Can some one confirm to me where the Cam sensor is please, I understand it to be behind the starter motor (which is on the front of the Engine 20cdt)
and is it a big jobby to get out and change ?

cheers

carl
 

·
Registered
Joined
·
22 Posts
Discussion Starter · #2 ·
s'ok i found it and just for anyone else looking for it do the following (Note this is on the Diesel engine !!! :-

remove the top rover engine cover (3 bolt headed screws 8mm socket)

on the left of the cam cover theres a sensor held in with 1 star head screw remove the screw waggle the sensor gently and hey presto its out

Crank hsaft sensor is to the right hand side down about 3/4 of the way and is a double there abouts of the cam shaft sensor

hope this helps some one

cheers

carl
 
1 - 2 of 2 Posts
Top