MG-Rover.org Forums banner

rover 620 starting problems

805 views 0 replies 1 participant last post by  Zlatko 
#1 ·
:errx2:I had some starting problems so i did a compression measurment test. I have a 620SDi 1994cc with 19.5:1 compression ratio. The measured value on the mechanic test was 22bar so ill ask for your opinion is it good or bad. Looking forward for your help!!!
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top