MG-Rover.org Forums banner
1 - 1 of 1 Posts

· Registered
Joined
·
2 Posts
Discussion Starter · #1 ·
After replacing a broken hinge and got the fore and aft alignment right it still sits too high at the front. Removing the shim under the hinge is not enough. Has anyone else had this issue. Could it be that the whole roof panel is raised up at the back lifting the tailgate?
 
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top