Forums banner

removing the prop shaft to make her a 2wd help please :)

19511 Views 9 Replies 4 Participants Last post by  Ex-MG
Ello freelander experts i need just a little bit of help in making my dads freelander 2wd as its banging from the prop shaft when reversing all i really need to no is when removing the prop shaft do i just need to put a blanking plate on the IRD unit ?? or is there anything else to cap off or anything else i need to do any help would be awesome :)

1 - 2 of 10 Posts
Just mark up the flanges at each end of the prop and on the diff/transfer box. Then unbolt & remove the prop with the VCU, takes about 15 mins to do, easy.
Look on Landyzone forums for best guides etc, here is a link for what to look out for...
1 - 2 of 10 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.