When trying to close the roof with "one touch" operation it closes about 2/3 of the way and then decides to open as if there was an obstruction in the way, which there is not.
It will close fully if I hold the switch and opening and tilting are fine.
I did have someone suggest that there was a "memory" effect that could cause this but my handbook p35 does not mention this.
Anyone any ideas?
Thanks
It will close fully if I hold the switch and opening and tilting are fine.
I did have someone suggest that there was a "memory" effect that could cause this but my handbook p35 does not mention this.
Anyone any ideas?
Thanks
