MG-Rover.org Forums banner
1 - 1 of 1 Posts

·
Registered
rover_75
Joined
·
17 Posts
Discussion Starter · #1 ·
When trying to close the roof with "one touch" operation it closes about 2/3 of the way and then decides to open as if there was an obstruction in the way, which there is not.

It will close fully if I hold the switch and opening and tilting are fine.

I did have someone suggest that there was a "memory" effect that could cause this but my handbook p35 does not mention this.

Anyone any ideas?

Thanks
 
1 - 1 of 1 Posts
Top