MG-Rover.org Forums banner
1 - 1 of 1 Posts

·
Registered
Joined
·
5 Posts
Discussion Starter · #1 ·
Hi all
Just bought a MG ZR a few days ago.
It after tearing down the door cards on both sides (driver side had a faulty motor which has been changed) i changed both window motors but the passenger side still wouldn't move. Checked the voltage and one direction (not sure up or down) would have 0.4V and the next was even lower, dad told me to check the fuse but we have no clue where it is. I believe driver side was 12V or close enough
I know the motor works because when i installed it, it wasnt fully up and there was about an inch gap so i used the Rover parked next to it to power the window and move it all the way
 
1 - 1 of 1 Posts
Top