MG-Rover.org Forums banner

number plate light not working.

1854 Views 3 Replies 2 Participants Last post by  48365
hi guys, i noticed last night my left number plate light was not working. today i have switched the bulb over from the working light to the non working light to see if it was the bulb. it was not. does anyone have any idea what this could be? also how much am i looking at to get this fixed as i really do not want to be messing around with electricals and wires with absolutely no knowledge. i would imagine the person would have to remove the boot handle and this is what i worry about as parts could get damaged as mechanics don't give a sh|t. thanks for any help.
1 - 4 of 4 Posts
Might be a snagged wire or dirty contacts, unplug the unit and clean up the prongs !!!
Might be a snagged wire or dirty contacts, unplug the unit and clean up the prongs !!!
i cleaned the prongs and hey presto. should of tried more rigorously before posting a thread sorry. thanks.
Nah, don't be like that, its good to dish out some advice no matter how basic, any more probs and were here to help !!! :broon:
1 - 4 of 4 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top