Forums banner
1 - 3 of 12 Posts

· Registered
1,346 Posts
Why/how have you filled the tappets with oil? Take the cam cover off turn the engine by hand to get cylinder 1 at tdc. Look at the cam lobes on cyl 1. The lobes should be pointing away from each other slightly downwards. If not turn the engine over by hand 180 degrees so cyl 1 is at tdc again and take another look.

Sent from Drew @ Roverdose
1 - 3 of 12 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.