MG-Rover.org Forums banner

Need some more mod ideas...

4222 Views 14 Replies 9 Participants Last post by  MR (Z)T
Well, i've most definately caught the modifying bug. Unfortunately i've run out of ideas!

Got some time spare before I go back to Uni, but not too much cash spare. Any suggestions?

Current mod list:

Code:
[B]Interior:[/B]
Alcantara / Half Leather Rear Seats,
[URL="http://www.upload3r.com/serve/160310/1268770160.jpg"]Navigo 3.5" V2 SatNav (TomTom 7)[/URL],
Permanently Live Hidden Hardwired USB Charging Hub,
Ignition Switched Hidden Hardwired USB Charging Point,
[URL="http://www.upload3r.com/serve/150710/1279198695.jpg"]Permanently Automatic Looping Video Camera + 8GB Class 6 MicroSDHC Card[/URL],
Brodit ProClip,
TrafficMaster ECU,
[URL="http://www.upload3r.com/serve/220710/1279839639.jpg"]LED Interior Lights[/URL],
LED Glovebox Light,
[URL="http://imgur.com/YTdS4.jpg"]DRL Switch[/URL],
[URL="http://imgur.com/YTdS4.jpg"]Heated Washer Jet Switch[/URL],
Harmon Kardon Tweeter Grills,
Harmon Kardon Parcel Shelf,
Rover 75 Manual Holder + MG Logo Sticker,
Drivers Side Grab Handle.

[B]ICE:[/B]
Kenwood KDC-W7534U USB Head Unit + Kingston 16GB Memory Stick,
Kenwood KDC-C469 6 CD Changer,
Harmon Kardon Speakers (Front & Rear, Mids & Tweeters),
JBL GTO4000 4-Channel 600w Amp (Mounted On Rear Seat Back),
SPLX 350w Amp (Mounted Under Drivers Seat),
Harmon Kardon Sub-Woofer,
Kenwood 9" Subwoofer (Including Speakon Quick Release Cable),
MG Rover Bluetooth Kit,
Dedicated JBL GTO626 Bluetooth Speaker (Mounted Above Pedals).

[B]Engine & Techincal:[/B]
EGR Bypass,
Viton Intercooler O-Rings,
[URL="http://www.upload3r.com/serve/220710/1279840898.jpg"]Air Intake Mod[/URL],
Piefburgh MAF,
Plenum Spyhole Mod,
Stebel horn.

[B]Lights:[/B]
[URL="http://www.upload3r.com/serve/220710/1279841127.jpg"]6000k HID Dipped Headlights[/URL],
Osram Nightbreakers Main Beam Headlights,
[URL="http://www.upload3r.com/serve/220710/1279840965.jpg"]LED Sidelights[/URL],
[URL=http://www.upload3r.com/serve/220710/1279840115.jpg]LED Daytime Running Lights[/URL].

[B]Exterior:[/B]
Heated Windscreen Washer Jets,
Shortened Front Mudflaps,
"CDTI", "ZT" & Union Jack Boot Badges Removed,
[URL="http://www.upload3r.com/serve/220710/1279840418.jpg"]OEM Replacement MG Front Badge[/URL],
Domed Front Plate,
Chrome Dust Caps,
[URL=http://www.upload3r.com/serve/220710/1279841339.jpg]Tow Bar[/URL].
A couple of ones i've already been thinking about:
"Boomerang" spoiler -need to find a trophy blue one,
190 Brake upgrade - need to wait to see what i'm doing with my wheels,
Caliper colour - need to see if i'm getting the 190 calipers first,
Braided brake hoses - same again,
Chrome sill trims - ideally want to find a set of Rover 75 chrome ones local instead,
Air filter - got a Pipercross ready to go in at the next service
Decat - if I get an extra bonus i'll go for it, if not i'll wait for my exhaust to break
LED light kit - sounds good, but £60 is quite steep,
Laguna splitter - tempted,
MK2 rear bumper - cant find a trophy blue one
Footwell lights - Not too adept at soldering into traces on the light unit. Splicing would be possible but not sure where the connectors are?
Spring mod - no information available :(

Any ideas? Like I said, cheap is nice...!
See less See more
1 - 15 of 15 Posts
Hi one you haven't listed but you mite have changed it, the PCV for the modified one? this is not a performance mod but an important one, the newer type does not get blocked up so stops oil spitting out of the dipstick and smoke, poor running performance and low rev's accelerating, Steve
I've installed footwell courtesy lights in my ZT and can definitely recommend them. I took the feed from the boot light and ran it along the sill under carpet which was far easier than trying to tap the interior lights.
75 walnut dash - looks classy in the ZT
Very much depends of the upholstery though. It looks good with the full leather or alcantara but it'd be dreadful next to coloured Matrix or Monaco seats!
Very much depends of the upholstery though. It looks good with the full leather or alcantara but it'd be dreadful next to coloured Matrix or Monaco seats!
Thats true - so MKI 190 interior and MKI 75 dash :drool:

See less See more
Thats true - so MKI 190 interior and MKI 75 dash :drool:
Nice! The walnut looks lovely with the all-black dash.
What size DRL's did you install jsut about buy a pair but the have a few different sizes?
I got one of the LED strips you can get on eBay - you can cut them to size.


From memory they were 6.5cm after i'd finished with them, but I could be wrong... and thats the measurement for the ZT's fake vent, not for 75.
how about a new bonet badge as yours is missing?

Attachments

See less See more
I got one of the LED strips you can get on eBay - you can cut them to size.


From memory they were 6.5cm after i'd finished with them, but I could be wrong... and thats the measurement for the ZT's fake vent, not for 75.
You will not find a trophy blue rear bumper only ignition blue for MK2
2
You will not find a trophy blue rear bumper only ignition blue for MK2
That explains a lot :(
how about a new bonet badge as yours is missing?
As you know, MG badges seem to delaminate like crazy, so I thought i'd replace mine - I removed the old (now silver!) badge and fitted this:



Unfortunately, it didn't quite fit (1mm too large) - I thought it'd be fine, so tried it anyway... mid overtake of an Audi the badge decided to fly up, over my car, over his and then end up in a ditch... looked impressive but I never found the thing again!

I bought an OEM one to replace it, but it took a while to arrive... thus why the car was badgeless for a week

But now:

See less See more
any pics of the led lights that u have fitted? would like to see what they are like on the zt
any pics of the led lights that u have fitted? would like to see what they are like on the zt
Not too great during the day, but still:

See less See more
  • Like
Reactions: 1
That explains a lot :(
As you know, MG badges seem to delaminate like crazy, so I thought i'd replace mine - I removed the old (now silver!) badge and fitted this:



Unfortunately, it didn't quite fit (1mm too large) - I thought it'd be fine, so tried it anyway... mid overtake of an Audi the badge decided to fly up, over my car, over his and then end up in a ditch... looked impressive but I never found the thing again!
I bought this badge about 6 months ago and found it didnt quite fit.... i modified the space using a soldering iron. It now sits flush...
1 - 15 of 15 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top