MG-Rover.org Forums banner

1 - 3 of 3 Posts

·
Registered
mgf
Joined
·
344 Posts
Discussion Starter #1
Does any one know where I can get info on

1. The SRS control unit (requires a replacement capacitor) does the vvc twin air bag unit differ from the std unit? 1998 vvc mrk1 std F.

2. a how to guide for changing a. oil tem sensor b. ambient air sensor c.coolent sensor

3. Timing diagrams for the vvc

PS. Dr Dave I have noticed an ocasional misfire when the engine is under labour.

original post can be found here
http://forums.mg-rover.org/showthread.php?t=123808

Thanks
 

·
Registered
Joined
·
3,805 Posts
1. The same SRS unit is used in both 1.8MPis and VVCs. Would have to verify whether single airbag cars use the same or different SRS ECU however...

2. If we're talking about the engine sensors, then these are easy to change. The loom plug has a circlip that you depress to remove the plug, and the sensors themselves just screw in. :)

3. I don't know whether VVC timing diagrams are available on-line?

Regarding the misfire (sorry, I'm not Dr Dave!) - I would suspect the HT leads and spark plugs - you may still be on the originals, and you'll probably want to think about replacing these service items anyway.
 
1 - 3 of 3 Posts
Top