MG-Rover.org Forums banner
1 - 1 of 1 Posts

·
Registered
Joined
·
1,349 Posts
Looks like the equivalent to the black and red connectors on a VVC mems which uses the 2J mems. If so. both black connectors on the Mems3 are also part of the one-engine loom. Note that if the car has aircon, the engine loom is different.

I suggest you get yourself the electrical circuit diagrams. There are other differences between the Mems3 engine loom and others - ie the 85amp fuse in the engine compartment which eliminated the old fusible link between starter and alternator.
 
1 - 1 of 1 Posts
Top