MG-Rover.org Forums banner
1 - 1 of 1 Posts

· Registered
Joined
·
1,850 Posts
I agree with mg_xpower here. Why bother drilling the back of the light units. If you have them off the car already it is easier and quicker to just take them apart. If you just unclip the adjuster you will not alter the angle of the lights anyway, and when you re-build they will be back in the same place.

Have fun
 
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top