MG-Rover.org Forums banner
1 - 3 of 3 Posts

·
Registered
Joined
·
46 Posts
Discussion Starter · #1 ·
I own a 2004 ZS 180...I have just recently been troubled with the 'dreaded rattle'...Has anyone out there ever split the inlet manifold..I've read somewhere that a heatgun or hairdryer can soften the seal on the underneath after removing the screws to gain entry !! I have also heard that you can have it de-flapped inside..Thank You in advance for any answers :)
 
1 - 3 of 3 Posts
Top