MG-Rover.org Forums banner

1 - 6 of 6 Posts

·
Registered
Joined
·
3 Posts
Discussion Starter #1
Hey guys, I recently bought and MG TF 1.8. Its a pretty good runner, but I'm looking to have the head gasket replaced (amongst other things) can anyone recommend anyone for this in the south wales area? I found a website which seem to offer a pretty good service, but they're too far away. I'm looking for something similar to the service offered below
 

·
Registered
Joined
·
3 Posts
Discussion Starter #2
Hey guys, I recently bought and MG TF 1.8. Its a pretty good runner, but I'm looking to have the head gasket replaced (amongst other things) can anyone recommend anyone for this in the south wales area? I found a website which seem to offer a pretty good service, but they're too far away. I'm looking for something similar to the service offered below
We are an MG-rover Head gasket repair specialist.
Head gasket repair on MGF MG TF 1.6/1.8 non VVC engine £320, including new head bolts, full head set, oil and filter change, coolant flush and change, carried out at our workshop. Extra's available at additional cost, read below.

Our head gasket repairs are done to the very best standards, the same as we work to with our high performance engine rebuilds, not just a general garage repair.

The prices below are the total amounts including replacement of the water pump, timing belt, head bolts, head gasket (and other required gaskets and seals associated with this and with stripping the head down). The price also includes head skim and pressure test, coolant flush and new coolant, as well as new oil and oil filter. (VVC models obviously include replacement of the second belt, re-timing of the VVC mechanisms etc). We use a full head set in our repair, we don't think it should be required to mention we replace cam seals, rocker cover gasket etc as we would expect to do no less, however, others seem to mention these parts giving the impression you would pay extra for this elsewhere.

6month warranty given.
 

·
Registered
Joined
·
6,741 Posts
Hi and welcome to the forum

Is that second message a quote from the garage?

Unless it's broken don't fix it - same applies to the K series head gasket.

James
 
1 - 6 of 6 Posts
Top