MG-Rover.org Forums banner
1 - 2 of 2 Posts

·
Mmmm....Rover..
Joined
·
10,426 Posts
The flywheel is particular to the version of the engine management used, you car should be using MEMS 1.6 and the ecu should look like the one in the attached image.

The later MEMS 1.9 has a X shape pressed into the aluminium cover of the ecu. If the "new" engine uses this version then you will have to swap the flywheels.
 

Attachments

1 - 2 of 2 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top