MG-Rover.org Forums banner
1 - 10 of 10 Posts

·
Registered
Joined
·
54 Posts
Discussion Starter · #1 ·
ITG filter, all hoses, cold air feed, fixing kit and spray oil. Complete in original box with full fitting instructions, Come of my ZS180 which is now sold :( Filters cost about £350 new.

Also, Dastek Uni-chip (new style). This is a professional fit chip (piggy back) which must be installed by qualified technicians. I had this fitted at Dastek Dalgety Bay at a cost of £370, this included rolling road tuning etc.

Pictures available on request.

Please PM sensible offers. If not sold by Monday 4th April, It'll be on Ebay.


Jackie xx
 

·
Registered
Joined
·
2,161 Posts
would these parts fit my coupe.. well intrested in the chip.. doubt it will but still :=p:

EDIT: 1.6 k-series.. soon to be 1.8 k-series
 

·
Registered
Joined
·
54 Posts
Discussion Starter · #4 ·
All PM's replied to, sorry I had login probs.

Chip: As far as I know, the chip is a completely generic part, the only changes required are to the wiring into the existing ECU loom and a remap of the flash memory stored in the chip itself. This is why it "must" be fitted at a Uni-chip franchise.

This is not a plug and play chip like superchip, its mapped to your car on the dyno at 500 rev intervals.

So yes, it should fit any car :)

Jackie x
 

·
Registered
Joined
·
2,161 Posts
Hmmmmm........ You got any part numbers ?? ill email the dudes and ask them if it will work..

How much you looking at for the unit ??
 
1 - 10 of 10 Posts
Top