Yes, cam belt must come off and should be replaced at the same time so this will mean also removing the engine mount and front crank pulley.
How easy to change water pump
Hi,
After scratching my head for a few days, I have found that the water pump on my S reg 400 (416) is leaking. Is this a fairly easy job to do or am I going to have to remove the timing belt and everything else which will make it alot harder than just changing the pump. Any advice will be very appreciated.
Many thanks
Ian
After scratching my head for a few days, I have found that the water pump on my S reg 400 (416) is leaking. Is this a fairly easy job to do or am I going to have to remove the timing belt and everything else which will make it alot harder than just changing the pump. Any advice will be very appreciated.
Many thanks
Ian
1 - 2 of 2 Posts
1 - 2 of 2 Posts
- This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
MG-Rover.org Forums
A forum community dedicated to MG & Rover owners and enthusiasts. Come join the discussion about performance, troubleshooting, upgrades, maintenance, and more!
Full Forum Listing
