MG-Rover.org Forums banner
1 - 1 of 1 Posts

·
Registered
Joined
·
7,067 Posts
The head will bolt straight on with the 16v manifolds both inlet and exhaust and 16v cambelt are needed. so buy a brand new cambelt and the landrover head gasket.

The catch 22 is if the piston tops have both sets of valve cut outs for 8v and 16v heads, all the late r100 mpi's do and members of metropower have done this a few times and not knowing anyone that havn't but wouldn't like to say for certain.
 
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top