MG-Rover.org Forums banner
1 - 6 of 6 Posts

·
Registered
Joined
·
4 Posts
Discussion Starter · #1 ·
Hello, i have Harmony in my Rover 75, and i have CD Changer from BMW, I need cable between this units, or wiring of this connection cable. See connectors on pictures links. I was searching on google but i don't find anything about it... Thanks very much for your help!

harmony connector photos:

http://fotky.azet.sk/jsFotka.phtml?&ft=10033606&ftv=1&ftid=1

http://fotky.azet.sk/jsFotka.phtml?&ft=10033607&ftv=1&ftid=2

alpine changer connector foto:

http://fotky.azet.sk/jsFotka.phtml?&ft=10033608&ftv=1&ftid=3
 

·
Registered
Joined
·
4 Posts
Discussion Starter · #5 ·
I don't want buy new changer... Is there some other solution? some special cable or convertor or something else?
I have this one BMW Alpine changer at my garage... :)

Thanks for your "know-how"
 

·
Registered
Joined
·
4 Posts
Discussion Starter · #6 ·
Hello...

Harmony and every Alpine (BMW) changer are working together... It is ok, comunication is ok, what you need is only right cable- not original cable. I was create a cable and everything is working now ok. It's fine.
If anybody need some info about this: [email protected]
 
1 - 6 of 6 Posts
Top