MG-Rover.org Forums banner
1 - 1 of 1 Posts

·
Registered
Joined
·
1,747 Posts
I would have thought that £130 is reasonable for respraying a hardtop. I've heard of body shops asking for a lot more than that in the past. What you've got to ask yourself is will he do a good job.

You can adjust the clip. Open it up and you'll see a screw with a long nut in the middle of it. It's held in position with a metal wire clip. Flip this back and turn the screw (usually with your fingers) to tighten or losen the catch.

I think you've got a bit missing. There is a wire that connects to the top and bottom of the HRW with a plug on the end that then fits into the plug in the wiring loom (at back parcel shelf). Not sure where you would buy one of these or get one made up.
 
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top