MG-Rover.org Forums banner
1 - 1 of 1 Posts

· Registered
Joined
·
6,715 Posts
You will often find that the gear selector mechanism (under the console/leather gaitor) has some 'slack' in it. Take a look at this and see if anything needs tightening up.

Also remember that the heater pipes run through the 'transmission tunnel' so heat can have an effect on gear change, but not in the same way that you would ordinarily expect with other cars....

Good luck.
 
  • Like
Reactions: Chris T and D4KGP
1 - 1 of 1 Posts
Top