Forums banner
1 - 1 of 1 Posts

197 Posts
Discussion Starter · #1 ·
Hi guys,

Replaced my fan motor on my ZT yesterday, wasnt a bad job to do.
Stripped my old motor and sure enough one of the brushes had totally worn away.
Anyway just a message to say thanks to all the people on this forum who have posted information on doing this job.
Made life alot easier knowing exactly what i needed to strip to get at motor.

1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.