MG-Rover.org Forums banner
1 - 13 of 13 Posts

· Registered
Joined
·
632 Posts
Discussion Starter · #1 ·
I know a few of you guys have fitted a F or a TF steering wheel just a couple of questions

1) Whats the difference between fitting a F and a TF I've heard you might need an adaptor for the TF

2) I've seen you need to cut down the original airbag to get it to fit, could you not fit an airbag of the F/TF

Cheers Brian
 

· Registered
Joined
·
6,751 Posts
If you look at the back of the wheels the slot for cancelling the indicators is at 90' on the F/TF/ZR wheel to where it is on the ZS wheel, you can make an adaptor to fix this.

If you use the matching airbag and rotary coupler to the wheel you will have no problem fitting it all together, if you use your original airbag you may need to trim it slightly.
 

· Registered
Joined
·
21,961 Posts
All the coupler does, is stops the need to swap horn buttons, and cut down the standard airbag to fit.

Still need the adapter making, whichever coupler you decide to use.

I got a local engineering shop to make mine, cost me a tenner. That little adapter was a work of art, i would never have got it as well made, if i was to make it myself.

Cheers
Dave
 
1 - 13 of 13 Posts
Top