MG-Rover.org Forums banner
1 - 5 of 5 Posts

· Registered
Joined
·
2,452 Posts
all 160's have them, the only time they havent if a cheap box is used to replace them or an aftermarket jobby.

The actuator is there for a reason, the quieten down the engine when they are put through the "drive by test" without them, it would never pass EU regs.

Take it off, but it wont make any difference, only noiser at lower revs. Hardly worth ruining a perfectly, fully functional box!!

HTH

Ben.
 
1 - 5 of 5 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top