MG-Rover.org Forums banner
1 - 4 of 5 Posts

· Registered
cityrover
Joined
·
24 Posts
Discussion Starter · #1 ·
I have a problem with electrical driver window when the door is closed, switch doesn't work, but if a open the door switch works well, anybody knows this problem, is it any relation between the door opening switch with the window opening switch, where i should look to find the problem.
Car is a Rover 420 sdi from 1997.
Thanks in advance.
 

· Registered
cityrover
Joined
·
24 Posts
Discussion Starter · #3 ·
Thanks Roverlike, it is very unconfortable opening door to close the window when u are driving, so it is dangerous too, i will quit door panel if i can see the wires.
 

· Registered
cityrover
Joined
·
24 Posts
Discussion Starter · #4 ·
Well, i was out of forum for a while, i had the problem of the window till yesterday i used an electrical contact cleaner outside the window switch and miraculously switch is working good.
Sometimes less is more. I am getting lazy with the car, doing very little sometimes.
Cheers and beers.
 

· Registered
cityrover
Joined
·
24 Posts
Discussion Starter · #5 ·
Well, i was out of forum for a while, i had the problem of the window till yesterday i used an electrical contact cleaner outside the window switch and miraculously switch is working good.
Sometimes less is more. I am getting lazy with the car, doing very little sometimes.
Cheers and beers.
 

Attachments

1 - 4 of 5 Posts
Top