MG-Rover.org Forums banner

1 - 2 of 2 Posts

·
Registered
rover_45
Joined
·
712 Posts
Discussion Starter · #1 ·
Anybody going to Cosford tomorrow got a spare boost gauge they can take along?

Needs to have 1/8 bsp flat seat connector on back and not need a power supply.

Fitted (well cable tied to the airvent) a boost gauge today ahead of fitting the GBE controller I got from Ron at the beginning of the week. Fully expected to find a standard setting but looks like the previous owner has already had a little tweek.

It's hitting 1.4 bar and that's seems rather high to me - just want to be sure that it's not the gauge giving a false reading.

Many thanks
Russell
 

·
Registered
rover_400_95_99
Joined
·
1,367 Posts
Hi Russell

i can help you on this one i have a spare splitfire boost guage that should do the job nicely still in its box pipes connects the lot will bring it along and you can use it to compare the readings
judt a thought though its in psi?? is that going to be any good??

Cheers Mark
 
1 - 2 of 2 Posts
Top