MG-Rover.org Forums banner

1 - 3 of 3 Posts

·
Registered
Joined
·
21 Posts
Discussion Starter #1
Hi guys
Is there a diagram in existence that shows where the seven wires on the C057 connector on the 5AS go to, it seems its a secret not covered in the electrical manual l have. There is a NK at1; 2,3 4, 5 are vacant, 6 GW , 7GR , 8SW , 9NS, 10 vacant; 11 SR , 12 PK and 13 vacant.
Thanks in advance
 

·
Rover Lifestyle
Rover 200 Rover 600
Joined
·
12,780 Posts
Connector C0057 on MGF 1998 means you have newer version of 5AS unti with second white connector (C0057). Prior versions of 5AS did not have this connector.

C0057:
Pin 1 - NK (brown/pink wire) - goes to central door locking drivers door superlock motor
Pin 6 - GW (green/white wire) - goes to RH repeater light
Pin 7 - GR (green/red wire) - goes to LH repeater light
Pin 8 - SW (grey/white wire) - goes to volumtric sensor connector Pin 3 (if you have volumetric sensor)
Pin 9 - NS (brown/grey wire) - comes from engine management relay module C0157-1
Pin 11 - SR (grey/red wire) - goes to passive coil around ignition key C0672-1
Pin 12 - PK (purple/pink wire) - goes to passive coil around ignition key C0672-2
 

·
Registered
Joined
·
21 Posts
Discussion Starter #3
Connector C0057 on MGF 1998 means you have newer version of 5AS unti with second white connector (C0057). Prior versions of 5AS did not have this connector.

C0057:
Pin 1 - NK (brown/pink wire) - goes to central door locking drivers door superlock motor
Pin 6 - GW (green/white wire) - goes to RH repeater light
Pin 7 - GR (green/red wire) - goes to LH repeater light
Pin 8 - SW (grey/white wire) - goes to volumtric sensor connector Pin 3 (if you have volumetric sensor)
Pin 9 - NS (brown/grey wire) - comes from engine management relay module C0157-1
Pin 11 - SR (grey/red wire) - goes to passive coil around ignition key C0672-1
Pin 12 - PK (purple/pink wire) - goes to passive coil around ignition key C0672-2
Thanks mate and a happy new year to you!
 
1 - 3 of 3 Posts
Top