MG-Rover.org Forums banner

1 - 1 of 1 Posts

·
Registered
Joined
·
1 Posts
Discussion Starter #1
hi

i a have a problem with my rover 200 (v) 1.6 the coil keep burning out, ive have had the ecu checked at it is fine, then i found a problem in the wireing it was burnt through and short circuiting, i replaced this and all was fine for about an hour then the car stopped again, it turns over but no spark as the coil is burned out again!!!! any help would be useful as im out of ideas

thanks
 
1 - 1 of 1 Posts
Top