MG-Rover.org Forums banner

1 - 2 of 2 Posts

·
Registered
Joined
·
17 Posts
Discussion Starter · #1 · (Edited)
I have an R860 radio cassette and have just fitted a 6 Cd autochanger in the boot.
The autochanger is a DC082 or part number VUW 100060.
The lead used was part number VUD 100380.

The autochanger powers on when the radio cassette unit is switched on and the cassette ejects ok but I cannot select the CD via the Mode button.

Is there anything I can do wiring wise or do I have to swap for a RC026 autochanger?
 

·
Registered
Joined
·
1,815 Posts
I have an R860 radio cassette and have just fitted a 6 Cd autochanger in the boot.
The autochanger is a DC082 or part number VUW 100060.
The lead used was part number VUD 100380.

The autochanger powers on when the radio cassette unit is switched on and the cassette ejects ok but I cannot select the CD via the Mode button.

Is there anything I can do wiring wise or do I have to swap for a RC026 autochanger?
The 082 wont work with your head unit. :(

I have a pair of boxed 026's for sale in the 'for sale' section.

Maybe you could sell your 082 to a Rover 800 owner??

Regards,

Steve
 
1 - 2 of 2 Posts
Top