[BNR3193]

Hello everyone,

I am in the process of fixing up a 620 Ti Lux '96 and I had to remove the inner door to fix the driver's window (classic on the 620 xD). So I disconnected the battery. Unfortunately, now the Auto function no longer works and I don't know the procedure for the reset on the 600. Could someone enlighten me?

Thank you for your answers

 

[BNR3193]

Thanks for the answer!

I'll try that but i didn't understand how was i supposed to dismantle it.

In fact I had another problem at the beginning: with the original switches the driver's window went down but did not go up and the passenger was fine. So I swapped with a 620 Si switch and it's the opposite. The driver's window works well (without auto mode) but the passenger window has a lot of trouble going up.

Almost same problems on my 2 previous R600

 

[BNR3193]

Thank you so much I will read this carefully!

What intrigues me is that the switch worked very well for all the windows in the old 620 Si but the passenger window doesn't work in the Ti so its a problem specific to the car?

I also noticed that the passenger window that doesn't go up goes up more easily when the engine is started.