MG-Rover.org Forums banner

1 - 10 of 10 Posts

·
Registered
Joined
·
38 Posts
Discussion Starter · #1 ·
Hi will the alloys (17")from a Vitesse go straight on my Ti ? How do they look ? need some pictures to help me decide !! Cheers !!!
 

·
Registered
Joined
·
938 Posts
Hi will the alloys (17")from a Vitesse go straight on my Ti ? How do they look ? need some pictures to help me decide !! Cheers !!!
Do it! Its how they should have made them from the factory!
Just a straight swap over. A few guys on here have done it, and wil prob show you some pics.
 

·
Premium Member
mg_zt_t
Joined
·
21,916 Posts
They look good and handle good. One down side: if you like a softer "Rover" ride quality, these are not for you. The lower profile tyres transmit more road imperfections into the car.

.... ;)
 

·
Registered
Joined
·
1,201 Posts
Iirc you'll need the wheel nuts from the vitty too for correct fit.

:broon: correct. the "cup" is slightly larger on the vittie alloys. heavy abuse could lead to the smaller ti nuts being ripped through and falling off.

don't forget to tell your ins company too.
 
1 - 10 of 10 Posts
Top