Forums banner

1 - 1 of 1 Posts

1 Posts
Discussion Starter #1
Hi Guys,

I am hoping someone can help me out. Some absoloute W****R tried to pinch my Trophy a few weeks back and made a bit of a mess of the igniton barrel. Ive taken the lock assembly off the car and stripped the barrel from the back (sheer bolts off, switch off, Rawl pin out, steering lock etc and barrel out) I found the end of the improvised pick jammed inside against the barrel pins and removed so now the key goes full depth. I am ready to reassemble however i am at a loss to know where the two barrel/rollers and small spring go. Hoping someone has a schematic to assist with the reassembly.

Long time lurker, only recent member.

1 - 1 of 1 Posts