MG-Rover.org Forums banner
variable intermitant wipe
1-3 of 3 Results
  1. MGF and MGTF
    My old corsa had a variable timer on the wiper that was set by switching the wipe on and off then on again at the time interval that you wanted. The system remembered that time. No sliding swiches or wheels. Now I am not an electrician so I have no idea if this could be added to an MGF/T. But I...
  2. MGF and MGTF
    With a lot of help from Chris T (thanks again Chris ;)) we've wired up my new 800 stalks to use intermittant variable wipe using the Pektron YWC10152 controller. The stalks work fine but the difference in delay is only about 2-3 secs max. Which controller did you use CJ, and whats your delay...
  3. How Do I - Answers To Common Problems.
    WARNING: This procedure involves removing and refitting the steering wheel airbag. READ THROUGH this procedure thoroughly and follow it methodically otherwise there is a high possibility of the airbag deploying! 1. Remove SRS fuse (or disconnect the battery negative terminal) and go make a...
1-3 of 3 Results
Top