MG-Rover.org Forums banner
replacement
1-8 of 8 Results
  1. MG 6
    Hi, Looking for advice or a guide on removing the ignition dock. I know you can get at it partly by removing the cover under the steering wheel, I know there are 3 screws, but seems possibly 2 of the 3 screws are very awkward to get to. Having the start up issues and tried all other options...
  2. Blog
    Last winter I noticed the o/s front brake dragging. :hot: I took the wheel off and freed and greased up the bits you should on the calliper, noting some uneven wear on the pads due to the dragging. As they were still within wear limits and serviceable when loosened up, I decided to renew them in...
  3. MGF and MGTF
    With the subframe transplant planned I've noticed the underfloor pipe is corroding badly at the rear so thought it an opportunity to replace with either copper pipe or stainless braided hose. I like the braided hose option as it is far easier to run, but I have no real experince. Would some...
  4. MGF and MGTF
    If I was to upgrade/replace the engine from a 1.6 TF to a 1.8, what are the thoughts regarding road tax and MOT passes based on emissions? I would be updating the V5C accordingly and by doing so would that automatically update the emissions and therefore automatically the road tax bands/MOT...
  5. MG ZT / Rover 75
    I got a "new" auto dimming interior mirror for my MG ZT 2.0 Diesel Cdti and need to remove the common (old) one and put that one on. Is there any technique for that like turning-and-sliding out or ? PLEASE HELP as I do not want to try forcing it in any way ~!
  6. MGF and MGTF
    Hi All, Can anyone tell me what screws i need to replace the soft top catches screws? Attached a pic of the screws i want to replace. I would like them in stainless steel or anything else that looks similar to Chrome which will look better with my replacement catches. Cheers Dan
  7. MGF and MGTF
    Hello everyone I've currently got my whole engine out of the car. I've had the head skimmed and a new block put in. While the engine was out the mechanic (Russell) told me i needed a new clutch as well. My question to you guys is, while the engine is out what else should i buy now and have...
  8. MG ZT / Rover 75
    My fan has never worked (even less since I cut the wires to rejoin them to the other brushes to see if they worked, turned out the motor itself is kaput) and as we're heading towards summer - no, honestly, we are! - I thought it about time I had it fixed. However there was no way I was paying...
1-8 of 8 Results
Top