MG-Rover.org Forums banner
gear linkage
1-4 of 4 Results
  1. MGF and MGTF
    I have noticed that the two gaiters at the ends of the gear-change Bowden cables are split. See photo. Can anyone suggest where replacements can be obtained? I cannot find anything on the Mike Satur or Rimmer brothers sites, but surely a similar length of gaiter must be used on some other...
  2. MGF and MGTF
    Hello everyone, I'm hoping to have some light shed on an unusual problem. I took my 2002 TF 160 out for a drive yesterday, got about 5 miles and without warning the gear stick became incredibly hard to shift. My first thought was as if someone had dumped a load of super glue on to it. I pulled...
  3. MG ZR / Rover 25, 200 & Streetwise
    Hi Everyone, Driving my 2000 Rover 25 GTi (PG1 gearbox) yesterday I was pulling away in 1st when something sounded like it had broken from the gearbox area and subsequently then the car could not deliver power to the wheels. When the car is idle, you can hear a very slight rub which wasn't...
  4. Blog
    Gears on my manual MG ZS have been getting noticeably hard to select recently and on inspection I found a lot of play in the gear linkage under the car on the UJ, just before it enters the PG1 gearbox. I ordered a new bracket and bushes from ebay for around £30. When I tried to fit it, I was...
1-4 of 4 Results
Top