MG-Rover.org Forums banner
gear change
1-3 of 3 Results
  1. MGF and MGTF
    Hello everyone, I'm hoping to have some light shed on an unusual problem. I took my 2002 TF 160 out for a drive yesterday, got about 5 miles and without warning the gear stick became incredibly hard to shift. My first thought was as if someone had dumped a load of super glue on to it. I pulled...
  2. MGF and MGTF
    I've got a problem with getting my MG TF into gear. It'll go into gear when the engine is off, but when the engine is on, it doesn't. Just makes a screeching noise. I've checked the fluid levels and seems good although slightly dirty. Clutch pedal only has resistance from about half way down...
  3. Blog
    Gears on my manual MG ZS have been getting noticeably hard to select recently and on inspection I found a lot of play in the gear linkage under the car on the UJ, just before it enters the PG1 gearbox. I ordered a new bracket and bushes from ebay for around £30. When I tried to fit it, I was...
1-3 of 3 Results
Top