MG-Rover.org Forums banner
cylinder head
1-6 of 6 Results
  1. Introduce yourself
    I own a Rover 25 1.4l 16v 103hp (naturally aspirated petrol engine) from 2003. I've had some issues recently, and I don't know if they're related to each other, so I'll start from the beginning. Since the end of November 2018, I've noticed that sometimes my car intermittently losed power at...
  2. Introduce yourself
    Hello all, I own a 1997 Rover 114 SLI and a 1991 Rover Mini Cooper, I am new to the forum and I would really appreciate some help as I am running out of ideas. I shall elaborate, I bought my Rover 114 SLI in February this year to be my daily drive, mechanically it has been very good apart from...
  3. MG ZS / Rover 45 & 400
    Well a Diagnostic has brought up no pressure on cylinder 3, the mechanic says its probably a burnt exhaust valve. i'm competent to do the head change myself i'm just curious of costs of reconditioning the current head and replacing damaged valves etc, or source a second hand one and have that...
  4. For Sale
    At long last I've finally got round to having a clear-out of the workshop and have the following items for sale: - Ported and Polished VVC Cylinder head with cam ladder, cam ladder bolts and valves. It was originally polished by Autosprint of Coleshill- there's a weld repair where one the...
  5. For Sale
    I have a VVC head which was purchased from an ex-Airtex engineer a few years ago, it had been returned from MG-R for testing and had completed approx 20,000 miles. No fire ring marks, no skimming required. I have stripped the head completely and had it chemically cleaned. All of the excess...
  6. Wanted
    wanted rover 25 cylinder head Hi, Im looking for a rover 25 cylinder head as I seemed to have cooked mine and its too thin to be skimmed. It is an x reg plate and 16 valve the part no.which is stamped on the inlet side is LDF106290 .If anyone has one fo sale I would be very grateful cheers.
1-6 of 6 Results
Top