MG-Rover.org Forums banner
calipers
1-5 of 5 Results
  1. Blog
    A reliable year for the ZS - so nothing to post on here for a while about it. But time for a service and the dreaded MOT. as well as the normal service, the brake discs were in a poor state, and attracted an advisory on last year's MOT so I decided to change them all, and change the pads and...
  2. MG ZS / Rover 45 & 400
    Hello I was about to order a rear O/S brake caliper for my 2001 MG ZS 180 when on the website they have two types! One with diameter 1 [mm] = 30 Part no CA671R OE numbers 43021SK3E00, 43021ST3E00, GBC161 And the other Diameter 1 [mm] = 34 and it says or brake disk thickness 10 mm Part no...
  3. Wanted
    Just got an MG ZS 180 and looking for a rear off side caliper in good condition as the current one has a seized cam which is causing the handbrake to stick. Need to get it through the MOT soon so rather than stripping it down I thought I'd check and see if anyone has a spare.
  4. Wanted
    Hi everyone, I am looking for a front pair of calipers, either 262mm vented or 282mm. If anyone has any please let me know how much with delivery unless your in Leicestershire or Peterborough area (can collect in these areas). Thanks, BarHopper :)
  5. For Sale
    Hi there, I've recently bought a set of these calipers to try and retro fit to my MGF but there was no way they're going to fit :( I'm not keen to change my wheels so I've decided to sale them on. The calipers are in pretty good condition (I would be tempted to give them a paint up but they are...
1-5 of 5 Results
Top